Procedia Engineering 15 ( 2011 )1171 – 1175
Advanced in Control Engineeringand Information Science
Preparation of the Plywood Using Starch-based Adhesives
Modified with blocked isocyanates
Haiyan Tan a, Yanhua Zhangb, Xiangli Wengc
College of Material Science and Engineering, Northeast Forestry University, Harbin,
China, 150040 P. R. China
Abstract
The purpose of the research was to prepare environment friendly plywood using starch adhesives modified by
blocked isocyanate. Blocked isocyanate and auxiliary agent were used to modify starch. The influence factors of
the bonding strength and water resistance of starch adhesive were studied by different solid content, adding
additives and adding blocked isocyanate. The results show that starch and blocked isocyanate adhesive to join the
ratio of 100/20, the dry bonding strength the most, while the starch adhesives and the ratio of blocked isocyanate to
join 100/25, the wet strength the most. Bonding strength and water resistance was improved significantly by
adding additives and isocyanates to starch adhesive. Plywood bonding strength from the performance of integrated
cost considerations, the optimum ratio of additives added 4% and 6%.
© 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of [CEIS 2011]
Key words Blocked isocyanates; Starch-based Adhesives; Modified;
1. Introduction
Starch adhesive wide range of sources of raw materials, simple process, easy to operate, low cost,
good adhesion and film forming, non-formaldehyde emission and other characteristics, and to highlight
environmentally friendly and renewable, sustainable development today, Become the most potential for
development of wood with a natural adhesive with one [1]. But the starch adhesive performance due to
poor water, poor storage stability and the bonding strength is small and limited areas in the application
of the timber industry [2].
Isocyanate adhesive with excellent bonding properties, water resistance, aging resistance, no
formaldehyde and other pollution problems is to adapt to a wide range of bonding materials, but the
cost is high, easy storage and water vapor reaction is difficult, especially in the stability of aqueous
solution Of the poor, soon after contact with water, foam and failure to respond and for short duration
[3]. By lively isocyanate (-NCO) closed, to ensure a stable closed system. When using the method to
re-lift by heating temperature, the isocyanate is released again, to play its superior performance [4].
Characteristics and for lack of starch adhesive, combined with the advantages of isocyanate adhesive,
this study blocked isocyanate modified starch adhesive, to add a small amount of modified starch Corresponding author. Tel.:+8613766838545
E-mail address: tanzzx168@163.com

zyhnefu@163.com,
1877-7058 © 2011 Published by Elsevier Ltd.
doi: 1


0.1016/j.proeng.2011.08.216
胶合板用改性玉米淀粉胶粘剂的研制_专业资料。采用普通玉米淀粉,通过丙烯酰胺接枝改性,同时采用封闭型异氰酸酯和三羟甲基苯酚(TMP)作交联剂,合成了一种改性玉米...
采用普通玉米 淀粉 ,过 丙烯 酰胺接枝改性,时采用封闭型异氰酸酯和三羟甲基...改性淀粉胶粘剂的制备 .. 主剂与封端 PD 缩聚物混合搅拌 2hTI 后出料保 ...
关键根据研究的生产工艺制备的改性淀粉胶粘剂用 于胶合板生产时 ,必须解决几个...有利于其与交联剂异氰酸酯发生加成聚合反应淀粉氧化后再加入丙烯酰胺自由基聚合的...
淀粉胶粘剂应用于胶合板生产的技术关键 根 据研究 的生产 工艺制备 的改性淀粉...与交联剂异氰酸酯发生加成 聚合反应 .淀粉氧化后再加 入丙烯酰胺 自 由基聚合...
水性改性淀粉——多异氰酸酯胶粘剂的研究_能源/...在淀粉颗粒上形成外壳,淀粉小颗粒 水,使把 屏蔽...以分I 胶合板用AI配 比为 , P胶 主剂 :联剂...
水性改性淀粉胶在包装用麻秆中密度纤维板中胶合...这主要是因为改性淀粉胶粘剂 中由于异氰酸酯基能与...1 )利用水性改性淀粉胶所制得的麻秆纤维板物理...
氧化-接枝双重改性淀粉胶粘... 18人阅读 4页 2... 以改性异氰酸酯作为交联剂,制备改性豆基蛋白胶粘...Ⅱ类胶合板的使用要求,并且改性豆基蛋白胶粘剂的...
人造 板使 用 的胶粘 剂基 本 上是 “ 三醛 ...淀粉进行化学 、 物理等方法改性后制 备胶 粘 剂...异 氰酸 酯具有异氰酸酯基, 为不饱和基团 , 易...
酯基 (-NHCOO),具有很高极性和活泼性的一类胶粘剂...年Deppe首先将异氰酸酯胶粘 剂应用在刨花板的制备上...酯胶粘剂制造人造板的胶合强度、湿强度、粘弹性等...
如醛基{一 1 淀粉 胶粘剂 改性机理 CHO) 、羧基 (OOH)一C 、酰胺基 (O...异氰酸酯 类化合 物,%~O 用于生产胶合板,产品胶合强度符合GB-94— , 86...
热门文档