文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 外语学习 > 英语学习 > A Holistic Approach to Reducing Backlight Power Consumption
侵权投诉

A Holistic Approach to Reducing Backlight Power Consumption

A Holistic Approach to Reducing Backlight Power Consumption

Exclusive Technology Feature

ISSUE:

A Holistic Approach To Reducing Backlight Power Consumption

by Greg Lubarsky, Texas Instruments, Santa Clara, Calif.

Long battery life is a key metric in the portable electronics market. The LED backlight driver for LCD displays accounts for 25% to 40% of the total active system power. In the past, the tools a designer had to minimize backlight display power consumption were limited to decreasing the LED driver current and increasing the converter efficiency. Today, power savings of up to 50% are possible by utilizing LED drivers with an optimized converter, ambient light sensors, and content adjusted backlight control (CABC) methods. These techniques can enhance driver efficiency without severely degrading the visual quality of the information found on the display (web, video, pictures, etc.)

Traditional Power Optimization

The primary power-saving technique surrounding the backlight driver traditionally has concerned the selection of a boost architecture. Two main types of boost topologies dominate the backlight driver architecture—the inductive boost and the switched-capacitor boost. The inductive boost is typically used in applications requiring series-LED drive whereas the switched-capacitor boost is typically used in parallel-LED drive architectures.

A switched-capacitor boost relies on the charging and discharging of capacitors to create a boosted output voltage. The number of gains offered by a switched-capacitor boost is determined by the number of flying capacitors and internal MOSFET switches. By selectively charging the capacitors in series/parallel combinations between the input and ground in one phase, and then reconfiguring the capacitors in parallel/series connections between the input and the output in a second phase, the converter is able to provide an output that has a higher voltage than the input.

A switched-capacitor boost converter is often limited to a fixed number of voltage gains (1x, 3/2x and sometimes 2x) to help increase the solution efficiency, while keeping the number of external components to a minimum. Additionally, the sizing of the switches used to configure the flying capacitors is key to maximizing efficiency. Minimizing the output impedance of the gains allows the charge pump to remain in the lowest gain for a long period of time, helping to boost the solution efficiency. Fig. 1 provides an example of a switched-capacitor boost converter based on the LM3535 multi-display LED driver and the associated LED drive efficiency

A Holistic Approach to Reducing Backlight Power Consumption

A Holistic Approach to Reducing Backlight Power Consumption

as a function of input voltage and LED voltage.

(a) (b)

Fig. 1. An LM3535-based switched-capacitor boost converter drives multiple LEDs in a typical display application (a). LED drive efficiency is graphed as a function of boost-converter input voltage and the LEDs’ forward voltage.

第1页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email