本文介绍了当今世界主要LNG工艺,值得一读。

SPE 133722
LNG for Petroleum Engineers
Michael S Choi, SPE, ConocoPhillips
Copyright 2010, Society of Petroleum Engineers
This paper was prepared for presentation at the SPE Annual Technical Conference and Exhibition held in Florence, Italy, 19–22 September 2010.
This paper was selected for presentation by an SPE program committee following review of information contained in an abstract submitted by the author(s). Contents of the paper have not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material does not necessarily reflect any position of the Society of Petroleum Engineers, its officers, or members. Electronic reproduction, distribution, or storage of any part of this paper without the written consent of the Society of Petroleum Engineers is prohibited. Permission to reproduce in print is restricted to an abstract of not more than 300 words; illustrations may not be copied. The abstract must contain conspicuous acknowledgment of SPE copyright. Abstract
While remote parts of the world are awash with hundreds of trillions of cubic feet (Tcf) of natural gas, the industrialized West and emerging economies of the East can’t get enough of the clean-burning, environmentally friendly fuel. The problem is transporting this compressible fluid long distances, across major bodies of water. For markets greater than 1,500 miles, liquefied natural gas (LNG) has proved to be the most economic option. By refrigerating natural gas (primarily methane) to -260ºF (-162ºC), thereby shrinking its volume by 600:1, LNG can be transported in large insulated cryogenic tankers at reasonable cost.
Natural gas liquefaction is a series of refrigeration systems similar to the air conditioning system in our homes consisting of a compressor, condenser and evaporator to chill and condense the gas. The difference is in the scale and magnitude of the
refrigeration. A typical single-train LNG plant may cost $1.5 billion and consume 6-8% of the inlet gas as fuel. Since many of the impurities (water vapor, carbon dioxide, hydrogen sulfide, etc.) and heavier hydrocarbon compounds in natural gas will freeze at LNG temperatures, they must first be removed, and disposed or marketed as separate products.
This paper will provide an overview of LNG liquefaction facilities, from inlet gas receiving to LNG storage and loading. However, the focus is on the liquefaction process and equipment. Differences among the commercially available liquefaction processes (cascade, single mixed refrigerant, propane-pre-cooled mixed refrigerant, double mixed refrigerant, nitrogen, etc.) will be discussed. The aim is to provide SPE members with a clear understanding of the technologies, equipment and process choices required for a successful LNG project.
Introduction
The liquefied natural gas (LNG) industry is currently experiencing explosive growth. There isn’t an oil and gas exporting country that doesn’t have a LNG plant in the planning stage or under construction. The Arab State of Qatar alone will be bringing on 50 million metric tons per year (Mtpa) of production in the next 3 years. This is equivalent to about 6.6 Bscfd of pipeline gas. In addition, new projects in the Atlantic Basin, Asia Pacific and Middle East could well double that figure in the same time frame. The excitement is driven by the convergence(集合) of technology and market. There are reportedly 2,500 Tcf (420 Billion BOE) of known natural gas reserve stranded(搁浅) in remote areas. The barrier to taping this abundant source of clean energy has been the cost of liquefaction and shipping. With recent advances in liquefaction technologies and rising natural gas price, the time has finally arrived for LNG to be economically attractive to both producer and consumer.
Air Products & Chemicals Inc.’s (APCI) with about 75% of the existing plant capacity. However, revitalization(新生,复苏and other processes, has given producers options. The competition has fostered innovations in plant design, train size and equipment utilization. This paper will discuss the gas pretreatment required, thermodynamics of natural gas liquefaction, features of the different liquefaction processes and the major equipment used.
This paper was selected for presentation by an SPE program committee ...Underground storages can be used to provide LNG feedstock, local distribution...
美国石油工程师协会-LNG工... 12页 2财富值 ... 石油资源储量分类标准介绍 38页 免费 LNG培训材料(..." paper SPE 10670 presented at the 1982 SPE ...
美国石油工程师协会-LNG工... 12页 2财富值 ... 石油资源储量分类标准介绍 38页 免费 LNG培训材料(..." paper SPE 10670 presented at the 1982 SPE ...
热门文档