文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 电子/电路 > A Comparison of Two Approaches to Pure-Inertial and Doppler-Inertial Error Analysis
侵权投诉

A Comparison of Two Approaches to Pure-Inertial and Doppler-Inertial Error Analysis

1. Introduction

A Comparison of Two Approaches to Pure-Inertial and Doppler-Inertial Error Analysis DONALD 0. BENSON, JR., Member, IEEE The Analytic Sciences Corporation Reading, Mass. 01867

Abstract Error equations for inertial navigation systems are derived using a perturbation (or true frame) approach and a psi angle (or computer frame) approach in a manner which shows the underlying as sumptions and allows direct comparison of the two methods. The comparison is general since the analysis is not associated with any particular mechanization. Different definitions of velocity errors and misalignment angles result from the two methods of error analysis, and, consequently, have significance in testing and analysis of pure-inertial systems, Doppier-inertial systems, and inertially aided weapon delivery systems. Examples and numerical results are presented for a local-level north-pointing mechanization.

Error equations for inertial navigation systems have been derived in many references using a perturbation (or true frame) approach[1],[2] and a psi angle (or computer frame) approach[3],[4]. A direct comparison showing the equivalence of the two methods does not appear to be available in the literture. The purpose of this paper then is to derive both forms of the error equations in such a way as to clearly define assumptions and compare the perturbation approach with the psi angle approach. Many references use one or the other of these approaches to analyze particular systems. For example,[6] derives error equations for a space-stable system by perturbation analysis and compares the error propagation to local-level systems in[71. Important consequences of comparing the two error analysis approaches are the relations between the variables when either of the approaches is used in practice. Such useful applications are testing and simulation of high-speed inertial systems, evaluation of inertially aided weapon delivery systems, and the expression for velocity divergence when, for example, Doppler velocity measurements are combined with the inertial system indication of velocity. Inertial navigation systems basically solve Newton's force equations from measurements (accelerometer outputs) of specific force (nongravitational acceleration) coordinatized in a frame whose orientation with respect to an inertial frame is controlled or known via gyroscopes. For terrestrial navigation, the equations in terms of ground velocity in an arbitrary rotating frame are

((ie dV/dtIr±++ wir) X and

V-g=f

(1) (2)

V= dR/dte= dR/dtIr+ Wer X R

where V= velocity with respect to Earth f= specific force g= plumb-bob gravity Wie= Earth rate Wir= angular velocity of the r frame with respect to an Earth-centered inertial frame' Wer= angular velocity of the r frame with respect to an Earth-fixed frame R= position vector from the center of the Earth, as shown in Fig. 1 d/dtIe; r= derivative in an Earth-fixed e frame or an arbitrary rotating r frame, respect

ively. Manuscript received October 7, 1974. Copyright 1975 by IEEE Trans. Aerospace and Electronic Systems, vol. AES-1 1, no. 4, July 1975. IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS

'

Definitions of suitable inertial frames are found in[5] . VOL. AES-1 1, NO. 4 JULY 1975 447

A Comparison of Two Approaches to Pure-Inertial and Doppler-Inertial Error Analysis

第1页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email