ASTM F833-10 Stroller
Phil and Teds Internal Test Report
Internal Test Report Number: Tested on behalf of: Phil and Teds Most Excellent Buggy Co 102-112 Daniell Street Newtown, Wellington New Zealand Test facility Location: Phil and Teds Most Excellent Buggy Co 102-112 Daniell Street Newtown, Wellington New Zealand Sample Description: 1x clip 1x Stroller 1x Carseat Tests Conducted: Safety performance specification for carriages and strollers - as per ASTM F833-11 clauses 6.6 and 6.7.1 combination units of a car seat on a stroller excluding 16 CFR 1303. Clauses 6.6 Testing Items Assessment Combination unit of a car seat on a stroller The combined unit shall conform to the requirement of 2.2, 5.5 per 7.2, 6.1 per 7.6, 6.2.4 per 7.3.2, 6.3 per 7.4.1, 7.10 and 9.1 2.2 federal standard requirements There shall be no hazardous points of edges as defined by 16 CRF 1500.48 and 16 CFR 1500.49 before and after testing to this consumer safety specification There shall be no small parts as defined by 16 CFR 1501 before testing or liberated as a result of testing to this specification 3. The paint and surface-coating on the product shall comply to 16 CFR 1303 Not Required 5.5 Latching mechanisms 6.1 Brake requirements 6.2.4 Static load (a combination unit of a car seat on a stroller) 6.3 Stability with occupant in the product * 7.10 Tip over test 9.1 Instruction Impact test - For combination unit of a car seat Date:
6.7.1
Tested by: ? Engineer
* Note: Standard specifies use of CAMI "mark II" Infant dummy (17.5 lb, 8kg) Phil and Teds Most Excellent Buggy Co test with a 9kg distributed load.
211784082.xls
Page 1 of 2
Internal Test Report
Number:
Tested on behalf of:Phil and Teds Most Excellent Buggy Co
102-112 Daniell Street
Newtown, Wellington
New Zealand
Test facility Location:
Phil and Teds Most Excellent Buggy Co
102-112 Daniell Street
Newtown, Wellington
New Zealand
Sample Description:1x clip
1x Stroller
1x Carseat
Tests Conducted:

Safety performance specification for carriages and strollers - as per ASTM F833-11 clauses 6.6 and 6.7.1combination units of a car seat on a stroller excluding 16 CFR 1303.
Date:Tested by:
?
Engineer
* Note: Standard specifies use of CAMI "mark II" Infant dummy (17.5 lb, 8kg) -
Phil and Teds Most Excellent Buggy Co test with a 9kg distributed load.
ASTM F833 - 01 Carriages... 暂无评价 8页 5财富值 astm e112-10 26页 10财富值 ASTM A105-10 5页 2财富值 ASTM A262-10 16页 1财富值 ASTM D638...
ASTM F833 - 01 Carriages... 暂无评价 8页 5财富值 astm e112-10 26页 10财富值 ASTM A105-10 5页 2财富值 ASTM A262-10 16页 1财富值 ASTM D638...
热门文档