文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 交通运输 > 变速器设计-外文翻译
侵权投诉

变速器设计-外文翻译

may make a computer analysis tool inefficient, in particularly when many different elements and clearances are encountered (e.g., gears, bearings, splines, synchronizers, and clutch) [1-3].

A comprehensive review of mathematical models used in gear dynamics, published before 1986, has been presented by [4]. In this review, gear dynamic models without defects have been discussed. In the past few years, researchers have been working on the gear dynamic models which include defects like pitting, spalling, crack and broken tooth.

A single-degree-of-freedom model is used which include the e4ffects of variable mesh stiffness, damping, gear errors, profile modifications and backlash. The effect of time-varying meshing damping is also included in this case, The solution is obtained by using the harmonic balance methods. A method of calculated the optimum profile

modification has been proposed in order to obtain a zero vibration of the gear pair [5-7]. They also proposed a linear approximate equation to mode the gear pair by using a single-degree-of freedom model

Gear rattle vibration is a undesirable vibration for passenger cars and light trucks equipped with manual transmissions. Unlike automatic transmissions, manual

transmission do not have the high viscous damping inherent to a hydrodynamic torque converter to suppress the impacting of gear teeth oscillating through their gear backlash. Therefore a significant level of vibration an be produced by the gear rattle and

transmitted both inside the passenger compartment and outside the vehicle. Gear rattle, idle shake, and other vibration generated in the automobile driveline have become an important concern to automobile manufactures in their pursuit of an increased level of perception of high vibration quality. The torsional vibration o driveline is a major source of gear rattle vibration. The manual transmission produces gear rattle by the impacting of gear oscillating through their gear backlash. The impact collisions are transmitted to the transmission housing via shafts and bearings [8].

The gear pair dynamic models including defects have been done by [9]. The study

上一页第3页

你可能喜欢

热门文档

相关文档

  • 外文翻译---汽车变速器设计

    外文翻译---汽车变速器设计 暂无评价

  • 变速器外文翻译

    武汉科技大学本科毕业设计外文翻译 型动力传动无限变速 无限变速机械无级变速器 翻译题目 I 型动力传动无限变速 机械无级变速器 学专学 院: 业: 号: 汽车与交通...

  • 变速器设计-外文翻译

    变速器设计-外文翻译_机械/仪表_工程科技_专业资料 暂无评价0人阅读0次下载举报文档 变速器设计-外文翻译_机械/仪表_工程科技_专业资料。可以用来做毕业论文的...

  • 汽车变速器设计外文翻译

    汽车变速器设计 汽车变速器设计 ---外文翻译 ---外文翻译 我们知道, 汽车发动机在一定的转速下能够达到最好的状态, 此时发出的功率 比较大,燃油经济性也比较好。...

  • 汽车与变速箱毕业设计外文翻译

    第 8 页 汽车与变速箱随着世界能源危机的持续,以及战争和能源---石油的消耗及汽车饱有量的 增加,能源在一天一天下降,终有一天它会消失的无影无踪。石油不是在生...

  • 汽车手动变速箱外文翻译

    吉林化工学院 外文翻译 手动变速箱 MANUAL GEARBOXES 性质: ?毕业设计 □毕业论文 教学院: 系 学生学号: 学生姓名: 专业班级: 指导教师: 职称: 起止日期: 机电...

  • 变速器外文翻译

    关键词:自动变速器液力变矩器 1/2 相关文档推荐 变速器外文翻译 9页 1财富值 变速器设计-外文翻译 7页 2财富值 外文翻译-变速器设计 9页 免费 关于皮带,...

  • 机械设计外文翻译

    机械设计外文翻译_工学_高等教育_教育专区。毕业设计(论文)外文资料翻译 学院...圆锥渐开线齿轮(斜面体齿轮)被用于交叉或倾斜轴变速器和平行轴自由侧隙 变速器...

  • 汽车手动变速箱外文翻译

    变速箱设计师不断的努力来限制燃料消耗以减少机 械损失,总的传输损耗输送条件,都依赖于独立的处理能力。 首要条件: (1) 传动损失:这些是由啮合齿之间产生的摩擦...

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email