Spectral matching with an LED-based spectrally tunable light source
I. Fryc, S. W. Brown and Y. Ohno
National Institute of Standards and Technology, Gaithersburg, MD 20899 1
Guest Scientist from the Bialystok University of Technology, Bialystok, Poland
1
ABSTRACT
A spectrally tunable light source using an integrating sphere with a large number of LEDs has been designed and constructed at the National Institute of Standards and Technology (NIST). The source is designed to have a capability of producing any visible spectral distribution, mimicking various light sources in the visible region by feedback control of the radiant power emitted by individual LEDs. The spectral irradiance or radiance of the source is measured by a standard reference instrument; the source will be used as a transfer standard for colorimetric, photometric and radiometric applications. A series of simulations have been conducted to predict the performance of the designed tunable source and source distributions have been realized for a number of target distributions.
Keywords light emitting diode, LED, lighting, tunable source, radiometry, spectrometry
1. INTRODUCTION
Light emitting diode (LED) applications have recently grown significantly, in particular since the development of high intensity blue and white light LEDs. LED-based, "solid-state" lighting is available in a surprising number of end-use products, for example as exit signs, traffic lights, decorative lighting, nightlights and neon-replacement, display lighting, automobile and aircraft lighting. Currently, a wide variety of LEDs are available with peak wavelengths covering the visible and adjacent spectral regions.
Spectral matching of light sources is often required, e.g., to simulate daylight illuminants for colorimetric measurements or visual inspection. Utilizing LEDs with different spectral power distributions, and controlling the radiometric output of each type of LED, it is possible to make a spectrally tunable light source (STS) that is able to provide a high fidelity spectral match to a specific "target" spectral power distribution (SPD). Such LED sources were reported in the past but some are for producing given colors (chromaticity) [1] and others attempted to match the spectrum to a given SPD [2] but desirable level of spectral control has not been achieved.
An STS using an integrating sphere and a large number of LEDs has been developed at NIST. The design of the source and a simulation of expected spectral matching were previously reported [3]. In this paper, we describe the construction and the performance of the STS developed, which is able to approximate the distributions of a wide variety of light sources, including daylight illuminants, with high fidelity. The STS’ output matching the SPDs of several different light sources are presented and additional applications of the source are discussed.
When the STS is calibrated for absolute spectral irradiance or radiance, it can be used as a transfer source for spectroradiometers as well as for colorimeters and photometers. In addition to conventional standard source spectra, the STS can simulate SPDs of special sources such as display red, green, blue and white; traffic signals; and discharge lamps. Also, a tunable source can approximate novel and unique spectral distributions that cannot be realized using conventional sources.
Consider photometric applications for example. Many photometry calibration facilities are equipped with large number of different standard sources of optical radiation, e.g. different types of lamps. Control and maintenance of these sources are very inconvenient and expensive. A STS that can mimic different source spectral distributions, e.g. the spectral distributions of different standard optical sources, would eliminate the need for maintaining a wide variety of different standard sources.
Fifth International Conference on Solid State Lighting, edited by Ian T. Ferguson,John C. Carrano, Tsunemasa Taguchi, Ian E. Ashdown, Proc. of SPIE Vol. 5941
Development of a Tunable... 9页 2财富值 Spectral matching with a... ...LED-based spectrally tunable source for radiometric, photometric, and ...
Spectral matching with a... 暂无评价 9页 8财富值 Development of a Slip...spectrally tunable LED source using LEDs with up to 40 different spectral ...
with application to incandescent light source design...for spectral control of thermal radiation,” Appl...L. Schaich, “Narrow-band tunable infrared ...
MZI-based wavelength interrogation system with tunable- FBG_专业资料。维普资讯 http://www.cqvip.com oPToELECTRoNI LEICS ERS V1 o3No51 etmbr20 .,5S ...
aeue CCII based more tunable voltage-mode all-... if second-generation current-controlled current ...proposed APFs need a single resistive matching ...
with size-tunable light emission, superior signal ... spectral characteristics, bioconjugation technology ...The green and red labels were spectrally resolved...
with Tunable Structure and Composition Daocheng Pan...Although the use of a single precursor source is...(1.50 eV), matching well with the AM1.5 ...
Daylight White LED Low pressure sodium lamp ... 8 band Spectral Band Method (SBM), deviation ...Spectrally Tunable Lighting Facility (STLF) STLF ...
with application to incandescent light source design...for spectral control of thermal radiation,” Appl...L. Schaich, “Narrow-band tunable infrared ...
热门文档