directional coupler-HFSS设计实例
THE QUADRATURE (90 ) HYBRID
The Hybrid coupler is often made of microstrip or stripline as shown in Figure 1. The microstrip form is also pictured in Figure 2. These couplers are 3 dB directional couplers with a 90 phase difference between the

outputs of the through and coupled lines. It is also known as a branch-line hybrid.

Figure 1. Geometry of a Quadrature Hybrid coupler. [1]
Figure 2. Photograph of a microstrip Quadrature Hybrid coupler. [1]
Referring to the geometry of Figure 1, the ideal branch-line coupler, with all ports matched and power
entering port 1, has evenly divided outputs at ports 2 and 3 with a 90 phase difference between them. The isolated port (port 4) has no power exiting it. The resulting [S] matrix is then given by
(1) 0j10 1 j001 [S]= 100j 01j0
Because of this symmetry, we can use any port at the input port. The output ports will be on the opposite side of the junction from the input port and the remaining port will be the isolated port. This symmetry is reflected in the scattering matrix, as each row can be obtained as a transposition of the first row.
热门文档