文档下载 文档下载导航
设为首页 | 加入收藏
搜索 请输入内容:  
 导航当前位置: 文档下载 > 所有分类 > 工程科技 > 机械/仪表 > 英译汉The Two-Dimensional Dynamic Behavior of Conveyor Belts
侵权投诉

英译汉The Two-Dimensional Dynamic Behavior of Conveyor Belts

辛苦弄得,希望能对你有用处,带来方便

Figure 11 shows the zone's where resonance caused by the belt/idler interaction may be expected for three idler diameters. The idlers of the belt conveyor had a diameter of 0.108 m thus resonance phenomena may be expected nearby a belt speed of 0.64 m/s. To check this, the maximum transverse displacement of the belt span has been measured during a start-up

英译汉The Two-Dimensional Dynamic Behavior of Conveyor Belts

of the conveyor.

Figure 12: Measured ratio of the standard deviation of the amplitude of

transverse vibration and the static belt sag.

As can be seen in Figure 12 the maximum amplitude of the transverse vibration occur at a belt speed of 0.64 m/s as was predicted by the results of simulation with the finite element model. Therefore the belt speed should not be chosen nearby 0.64 m/s. Although a flat belt is used for the experiments and the theoretical verification, the applied techniques can also be used for troughed belts.

6. CONCLUSIONS

Application of beam elements in finite element models of belt conveyors enable the simulation of the transverse displacement of the belt thus enabling the design of resonance free belt supports. The advantage of applying beam elements for small values of ß instead of using a linear differential equation to predict resonance phenomena is that also the interaction between the longitudinal and transverse displacement of the belt and the lifting of the belt off the idlers can be predicted from simulation.

7. REFERENCES

1. Lodewijks, G. (1995), "Present Research at Delft University of Technology, The Netherlands", 1995 5th International Conference on Bulk Material Storage, Handling and transportation, Newcastle, Australia, 10-12 July 1995, The Institution of Engineers, Australia Preprints pp. 381-394.

2. Roberts, A.W. (1994), "Advances in the design of Mechanical Conveyors", Bulk Solids Handling 14, pp. 255-281.

3. Nordell, L.K. and Ciozda, Z.P. (1984), "Transient belt stresses during starting and stopping: Elastic response simulated by finite element methods", Bulk Solids Handling 4, pp. 99-104.

上一页第14页

你可能喜欢

热门文档

相关文档

站点地图 | 文档上传 | 侵权投诉 | 手机版
本站所有资源均来自互联网,本站只负责收集和整理,均不承担任何法律责任,如有侵权等其它行为请联系我们.
文档下载 Copyright 2013 doc.guandang.net All Rights Reserved.  -  email